Check it out yarr, tried pushing a little bit today and achieved a nice speed.



I had to up the cpu voltage from 1.35v to 1.36v (CPU-Z shows the incorrect voltage), each core temp is shown using Core Temp, but i have been benching all day so it's been under stress for over 3 hr's and it's still nice and cool (80C is my max on air cooling).

Ninja Edit: forgot to post my ram, it's not overclocked but the timings are tight enough to make up for the OC.

_________________

Damn, thats awesome Kioto lol.

Im still nervous about the idea, and I havent even played around with the bus speeds. Im just not sure what Im doing lol. Mostly its because my Bios wants to know if it should be linked or unlinked and I have no idea what that means.

_________________
COBRA KAI DOJO NEVER DIES
RIP Shiloh

Linked is when the FSB and the DRAM are linked together, in other words the ram will be linked 1:1 with your fsb. That would make it so when you overclock your frequency (which will result in increasing your FSB) it will keep a locked 1:1 ratio between the fsb and ram resulting in both being overclocked.
Unlinked means you will overclock each independently or overclock one but leave the other at default.. I personally use unlinked because i can't keep a 1:1 with this ram, if i pass 815mhz it becomes unstable, so i leave it @ 810mhz but the FSB is jacked up.

_________________

Hmm interesting. I thought thats what it was, but couldnt find a direct answer.

Gonna play around tonight.

_________________
COBRA KAI DOJO NEVER DIES
RIP Shiloh

You blow something up yet?

_________________